Differenze tra le versioni di "Shapeoko101eng"
Jump to navigation
Jump to search
(Creata pagina con "=Step by step guide to correctly use the LaserCutter= #;Check if the compressor is on and connected #: this is the most important tool to prevent fire hazards, along with you...") |
|||
| Riga 7: | Riga 7: | ||
#: wait 3 minutes before cut without touching machine controls for ensure that the chiller (cooling system) is stabilized at the optimum temperature and the startup process takes place correctly | #: wait 3 minutes before cut without touching machine controls for ensure that the chiller (cooling system) is stabilized at the optimum temperature and the startup process takes place correctly | ||
# | # | ||
| + | |||
| + | |||
| + | [[Category:Doc]] | ||
| + | [[Category:StepByStep]] | ||
Versione delle 18:24, 29 giu 2015
Step by step guide to correctly use the LaserCutter
- Check if the compressor is on and connected
- this is the most important tool to prevent fire hazards, along with your constant presence near the machine during the entire process of your work
-
- Turn on the laser by turning the key
- wait 3 minutes before cut without touching machine controls for ensure that the chiller (cooling system) is stabilized at the optimum temperature and the startup process takes place correctly