Shapeoko101eng

Da WeMake Wiki.
Versione del 29 giu 2015 alle 18:22 di Costantino (discussione | contributi) (Creata pagina con "=Step by step guide to correctly use the LaserCutter= #;Check if the compressor is on and connected #: this is the most important tool to prevent fire hazards, along with you...")
(diff) ← Versione meno recente | Versione attuale (diff) | Versione più recente → (diff)
Jump to navigation Jump to search

Step by step guide to correctly use the LaserCutter

  1. Check if the compressor is on and connected
    this is the most important tool to prevent fire hazards, along with your constant presence near the machine during the entire process of your work
  2. Turn on the laser by turning the key
    wait 3 minutes before cut without touching machine controls for ensure that the chiller (cooling system) is stabilized at the optimum temperature and the startup process takes place correctly
Estratto da "http://wiki.wemake.cc/index.php?title=Shapeoko101eng&oldid=1387"